Buying an Older Mobile Home? Check the Local Age Rules Before You Move It

Before you buy an older home to move, get the destination city or county's answer in writing. This guide gives you a checklist and three local examples so you can find an age rule before you pay for the home, transport, or installation.

This is general information, not legal advice. Zoning, installation, title, and park rules vary by state and locality. Get a written answer from the destination authority before buying or moving a home.

The cheap home can have a destination problem

The question is not only whether the home can be bought and moved. It is whether the authority with jurisdiction over the exact destination lot will allow it there. Local zoning treatment of manufactured housing is a separate question from the federal construction standard, as the UNC School of Government's zoning summary explains for North Carolina.

The local rules below show that an age screen can turn on the home's age, the zoning district, or both. They are examples, not a nationwide rule. Read the current code for the parcel and ask the authority that will issue or deny the permit.

A HUD label is not placement approval

The federal HUD manufactured-home enforcement rules apply to homes entering first-stage production on or after June 15, 1976 (United States, current regulation). That date helps identify a HUD-code home. It does not answer whether a particular city or county will approve that home's placement.

For example, Jonestown's rule below uses a much newer five-year screen for particular districts. So a home built after June 15, 1976 can still fail a local placement screen. Start by checking the HUD data plate and certification label, then take the manufacture date and the exact lot to the destination authority.

Three local rules, three different screens

The examples report cited local text or city permit guidance. Each rule has a limited place and scope. None is a shortcut for a current permit decision.

Duchesne County, Utah: pre-June 15, 1976

County Code Section 8-11-4(C) classifies a used manufactured or mobile home that is not certified to the June 15, 1976 HUD Code because it was built before that date as Class C. Under Section 8-11-5(B)(2)(g), Class C and D manufactured and mobile homes may not be installed or occupied in areas under County zoning jurisdiction, including existing or proposed mobile-home parks. Ordinance 22-398 is the County ordinance that added this pre-1976 restriction.

Jonestown, Texas: five years at placement

In the M-1 single-family manufactured-housing district, Jonestown's Ordinance 2025-O-650, adopted January 9, 2025, says a home must be no older than five years at placement on the lot. The M-2 park district has a five-year placement rule. For an M-2 subdivision, the code uses a different trigger: the time of lot or space sale. A separate supplemental-regulations provision requires habitability-inspection documentation for a previously occupied home more than five years old. It does not say that inspection overrides either five-year rule.

Bullhead City, Arizona: two years, with a narrow replacement rule

Bullhead City's manufactured-home permit handout says homes may not be manufactured more than two years before the year of the permit request. Its RP-district handout points to the exception in City Code Section 17.36.115. That rule permits a new manufactured home no more than seven years old before the permit-request year only when a permitted removal first takes an existing residential trailer, mobile home, or manufactured home from an RP-zoned lot or space; the replacement must be on the same lot or space within one year. The new home must meet the applicable City, state, and federal requirements and have a HUD seal. A rehabilitated manufactured home on a chassis older than seven years does not qualify. It is not an allowance for a vacant lot.

These examples show why a word such as “old” is not enough. Duchesne County's cited classification turns on the June 15, 1976 HUD-Code date and its County-zoning scope. Jonestown's cited M-1 and M-2 park rules turn on five years at placement, while its M-2 subdivision provision uses sale timing. Bullhead City's ordinary screen turns on two years before the permit-request year; its seven-year rule has the replacement limits above.

Destination age-rule checklist

Use this before you make the home purchase, book the truck, or pay an installer.

  1. Identify the precise lot and authority. Record the street address, parcel number, city, county, zoning district, and the authority that will review the placement.
  2. Get the home's exact manufacture date and records. Photograph the data plate and labels, and save the title information. Do not substitute a model year for a precise manufacture date unless the local authority confirms that method. The HUD-label guide explains where to start.
  3. Read both the city and county rules. Find the section for manufactured homes, zoning, permits, and any relocation or replacement provision. Note the event the rule measures: placement, sale, or permit request.
  4. Ask planning or building for a written answer. Give the official the parcel, zoning district, manufacture date, proposed placement date, and whether it replaces a home already on the lot. Ask which code section and permit apply.
  5. Make the separate calls that fit the deal. Ask the state manufactured-housing agency, transporter, and, if relevant, park manager what each requires. Also check the home's destination compatibility, including its HUD wind-zone information.
  6. Use written clearance in the deal documents. Make the purchase and transport obligations contingent on written destination approval. Keep the authority's reply and cited code with the deal file.

Duchesne County, Utah - June 15, 1976 threshold. Obtain the exact manufacture or production date and ask whether the proposed action falls within the County rule's scope.

Jonestown, Texas - five years. Obtain the exact manufacture date, proposed placement date, district, and the code's method of measuring age. For an M-2 subdivision, also ask how the sale-time trigger applies.

Bullhead City, Arizona - two years. Obtain the exact manufacture date and permit-request year. If replacing a home, ask whether the RP zoning, permitted removal, same lot-or-space, one-year, HUD-seal, and chassis-age conditions in the City Code all apply.

Example only: a five-year screen

This is a hypothetical calculation, not a real home, deal, or permit decision.

In a proposed 2026 move, a home manufactured in 2019 is seven years old. Seven years exceeds five years. That does not settle a real Jonestown application: the buyer still needs the jurisdiction's written answer because the ordinance's wording, date-measurement method, and district control.

A local rule and a park rule are separate checks

Ask the park manager for its written lease, application, and home-acceptance requirements, as well as asking the public authority for its written placement or permit answer. Treat each answer as a separate check. Do not treat a park document as the authority's approval, or an authority's answer as the park's approval.

If you learn the home breaks the rule after buying

Stop transport and installation spending until you know the options. Keep the written denial or code citation. Review any purchase and transport contingencies you negotiated. Do not assume a variance, grandfathering, or another site will be available. If money or title is at risk, get state-specific legal advice.

Before the truck is booked

Do not proceed when the jurisdiction is unknown, the manufacture date is unknown, the local rule has not been read, or the destination authority has not answered in writing. A HUD-code date can be one useful record check, but it is not local placement approval. Clear the destination first.